A pre-purchase building inspection is a visual assessment of a residential property, carried out so a buyer can understand major defects, safety hazards and overall condition before a purchase deadline. In Western Australia the usual standard is AS 4349.1, and many contracts use REIWA building inspection conditions.
What is inspected?
The inspector examines safely accessible internal and external building elements, and, where access is safe and reasonable, the roof exterior, roof space and subfloor. The report records visible cracking, moisture, deterioration and apparent movement, together with photographs and any area that could not be reached.
Retaining walls associated with the main residence, and obvious safety hazards, are also typically considered within the agreed scope. Strata, villa and apartment inspections are carried out in accordance with AS 4349.1. Access to common property can be limited.
Perth construction is often double brick, with termite risk where timber and moisture meet, and with different ground conditions across the metropolitan area. The report comments on what could be seen in that context. It does not open walls or lift floor coverings as part of a standard visual inspection.
What standard applies, and how does it relate to the contract?
AS 4349.1 is the Australian Standard for pre-purchase inspections of residential buildings. Independent Building Experts inspects in accordance with that standard and aligns reports with the REIWA contract building inspection conditions commonly used in Western Australia. Your conveyancer or solicitor should advise how the report is used under your particular contract.
The standard is about a visual inspection and a written report. It is not a warranty, and it is not legal advice. Special annexures, time limits and what a seller must do are questions for your legal advisers.
What does the report include, and how fast is it delivered?
The written report records observations, photographs, the agreed scope, how AS 4349.1 was applied, access limitations and recommended next steps. Inspection reports are delivered within 24 hours of the inspection, so the findings can be discussed with your advisers before the relevant purchase deadline.
A timber pest inspection is a different service, carried out in accordance with AS 4349.3. It is included only when it is expressly confirmed in the written booking. Both services can often be completed on the same visit. See Building and timber pest inspections in WA.
How do you book?
Request a quote or book online, provide the property address, dwelling type, access contact and your purchase deadline, and agree the scope in writing before the inspection. Online booking is available for pre-purchase, timber pest, practical completion and pre-settlement inspections. Other services are by enquiry.
The Building Inspector is a Registered Building Practitioner (WA) No. 101996, with 27 years of national and international industry experience. For service details and booking, go to pre-purchase building inspections in Perth.
We do not provide legal advice.
Questions about this guide.
Does a pre-purchase inspection find every defect?
No, a pre-purchase inspection is a visual inspection of areas that can be safely and reasonably accessed on the day. Concealed defects, areas behind finishes, and matters that require a licensed electrician, plumber, gas fitter, asbestos assessor or structural engineer are outside a standard AS 4349.1 inspection unless a different scope is expressly agreed.
How soon is the report provided?
Inspection reports are delivered within 24 hours of the inspection. Because many WA purchase contracts allow only a short period for the inspection and report, the deadline and access arrangements should be confirmed when you enquire, and the scope agreed in writing before the visit.
Tell us what you need.
Share the property, your required service and deadline. Scope, fee and availability are agreed before work begins.